Media Blasting in Nevada

checkmark

Danger associated

The main danger associated with Media Blasting comes from the subjection to respiratory hazards due to the fine silica dust that results from the propelling of abrasive particles at high speeds against rough surfaces. In the absence of a well-ventilated work area, sufficient protective suiting, and effective respiratory shields, that dust can accumulate in the lungs and trigger disease. 800-395-6926

checkmark

Sand and debris

Since Media Blasting involves the spattering of fast-travelling sand and other debris in all directions, the particles have the potential to become just as abrasive to the skin as to the targeted surface.

checkmark

Left to professionals

Most often, Media Blasting is an endeavour that is best left to professionals with the necessary training and experience rather than the average homeowner embarking upon a household project.

Speak to us first, 800-395-6926.

Media Blasting with Media Blasting Guys in Nevada    

Media Blasting involves propelling fine particles at high speeds to clean, un-blemish, or re-texture a target surface, with its uses including:

  • - construction of concrete
  • - routine building maintenance
  • - decorative etching
  • - graffiti or paint removal
  • - rust removal from metal surfaces
  • - removal of oil, grease, dirt, paint, and oxides

Therefore, before we at Media Blasting Guys in Nevada begin any Media Blasting project, goggles or some other snug-fitting protective eye-wear are a must in order to prevent sand from flying into even the tiniest crevices. If not covered by a complete respirator system, which is preferable, at the very least the mouth and nose must be covered by a protective filter.

Media Blasting

Coveralls should be combined with a pair of durable work gloves in order to protect the rest of the body, along with duct tape to cover openings at the ankles and wrists to keep sand out of the suit as well.

Choosing the right tools for Media Blasting

Sand or abrasive particles used for Media Blasting projects should be as fine, debris-free, and uniformly shaped as possible. We set our air compression at a steady air pressure of 70 PSI to 100 PSI will be necessary for an effective Media Blasting job. Note that unless you are in possession of a commercial air compressor, your private air compressor will need to be shut off and recharged every few minutes in order to operate at this speed.

As professionals we here at Media Blasting Guys in Nevada undersand the process of Media Blasting involves spraying sand upon a surface at high speeds until the desire effect is achieved. An air compressor must deliver air pressure to the Media Blasting tank at a rate of forty to a hundred pounds per square inch. The Media Blasting tank must be charged with an appropriate abrasive material, such as sand, and pressurized so that the mixture of the material with air is not only being forced through the hose of the sandblaster, but through the nozzle as well.

Media Blasting Process with Media Blasting Guys in Nevada

During the Media Blasting process, the end of the sandblaster should be between 8-12 inches from the target surface - any closer, and you risk a narrower field of impact as well as a tear in your target surface. Holding the sandblaster further away allows you to distribute the sand across a wider area at once, but in this case you must blast the same area more times in order to fully remove the surface layer. While in operation, it is important that the sandblaster be in motion at all times with a sweeping movement. Steadying the sandblaster on one single point can tear a hole through the surface in no time.

Cities we serve

img Alamo, NV img Amargosa Valley, NV img Austin, NV img Baker, NV img Battle Mountain, NV img Beatty, NV img Blue Diamond, NV img Boulder City, NV img Bunkerville, NV img Cal Nev Ari, NV img Caliente, NV img Carlin, NV img Carson City, NV img Crescent Valley, NV img Crystal Bay, NV img Dayton, NV img Deeth, NV img Denio, NV img Duckwater, NV img Dyer, NV img Elko, NV img Ely, NV img Empire, NV img Eureka, NV img Fallon, NV img Fernley, NV img Gabbs, NV img Gardnerville, NV img Genoa, NV img Gerlach, NV img Glenbrook, NV img Golconda, NV img Goldfield, NV img Halleck, NV img Hawthorne, NV img Henderson, NV img Hiko, NV img Imlay, NV img Incline Village, NV img Indian Springs, NV img Jackpot, NV img Jarbidge, NV img Jean, NV img Lamoille, NV img Las Vegas, NV img Laughlin, NV img Logandale, NV img Lovelock, NV img Lund, NV img Luning, NV img Manhattan, NV img Mc Dermitt, NV img Mc Gill, NV img Mercury, NV img Mesquite, NV img Mina, NV img Minden, NV img Moapa, NV img Montello, NV img Mountain City, NV img Nellis Afb, NV img Nixon, NV img North Las Vegas, NV img Orovada, NV img Overton, NV img Owyhee, NV img Pahrump, NV img Panaca, NV img Paradise Valley, NV img Pioche, NV img Reno, NV img Round Mountain, NV img Ruby Valley, NV img Ruth, NV img Schurz, NV img Searchlight, NV img Silver City, NV img Silver Springs, NV img Silverpeak, NV img Smith, NV img Sparks, NV img Spring Creek, NV img Stateline, NV img Sun Valley, NV img The Lakes, NV img Tonopah, NV img Tuscarora, NV img Valmy, NV img Verdi, NV img Virginia City, NV img Wadsworth, NV img Washoe Valley, NV img Wellington, NV img Wells, NV img West Wendover, NV img Winnemucca, NV img Yerington, NV

Key features

Media Blasting in Nevada
Coverage for Nevada
Zip codes near Nevada


Click To Call

  • img Wide range of blasting media
  • img No abrasion to surfaces
  • img Delivery and pick up
  • img Flexible prices